• <tbody id="awnxc"><noscript id="awnxc"><i id="awnxc"></i></noscript></tbody>
  • <tbody id="awnxc"></tbody>


     

    Parker派克產品


    流體控制閥
    工程材料
      O型圈潤滑油
      測量及安裝工具
    13910122694
    產品資料下載
     
       

     

    Parker 快速接頭和附件
    Parker Quick Couplings and Accessories
    Parker Quick Couplings快速接頭
    Connect Under Pressure, Multi-Purpose Quick Couplings (hyd, fluids) up to 4,500 psi - Snap-tite PH Series Couplers
    Snap-tite PH 系列快換陰接頭 - 多功能快換接頭,在壓力下連接,承壓(液壓,流體)可達 4,500 psi

    派克通用型帶壓連接快換陰接頭以及陽接頭形式多樣,可用于各種管路應用,適合于管路的快速簡單地連接以及斷開,并能在背壓下進行連接。 Parker's general purpose connect under pressure quick couplers and nipples are versatile for use across a spectrum of applications where fluid lines require fast and easy connection and disconnection while under residual pressure

     

     

    Snap-tite PH 系列陰接頭,承壓(液壓,流體)可達 4,500 psi ,能與帶閥的Snap-tite H 系列陽接頭配合連接。該系列推薦連接是僅一端的連接(陰接頭或者陽接頭)使用 PH 系列,而非兩端。 Snap-tite PH Series Couplers (hydraulic, fluid) up to 4,500 psi connect with valved Snap-tite H Series Nipples. It is recommended that only one half of the connection (coupler or nipple) be PH version, not both.

    派克Snap-tite PH 系列使用錐閥形式,并且增加了壓力釋放器選項,能夠在靜壓達到3000 psi 情況下進行連接。使用 PH 系列陰接頭,安裝在壓力管路中,能夠簡單地與帶閥的H系列陽接頭進行連接。PH 系列陰接頭以及陽接頭目前可供尺寸范圍為3/8", 1/2" 以及 3/4" ,其他尺寸范圍需要咨詢工廠進行定制。 Parker's Snap-tite PH Series have poppet valves with an added pressure relief feature to allow connection under static pressures up to 3000 psi. With a Snap-tite PH Series Coupler installed on a pressurized line you can easily connect with a mating valved Snap-tite H Series Nipple. PH Couplers and nipples are available in 3/8", 1/2" and 3/4" sizes with other sizes available by request.

     

     

    Connect Under Pressure, Multi-Purpose Quick Couplings (hyd, fluids) up to 4,500 psi - Snap-tite PH Series Couplers

     



    技術參數Technical Characteristics:
    - Sizes: 3/8” – 1”
    - Materials: Steel
    - Port Ends: Female SAE, Female NPTF std (Male SAE 37 degree Flare, Male NPT by request)
    - Seal Options: Nitrile, Fluorocarbon, Ethylene Propylene
    - Coupler options include: Sleeve Lock
    - 尺寸范圍:3/8” – 1”
    - 材料:碳鋼
    - 尾端連接:標準供貨:SAE 內螺紋,NPTF 標準內螺紋(SAE 37°擴口,NPT外螺紋可根據需求定制)
    - 密封選擇:丁腈橡膠,氟橡膠,乙丙橡膠
    - 陰接頭可選項:套筒鎖

     

    市場Markets:
    - Industrial
    - Construction
    - Oil and Gas
    - Agriculture
    - 工業
    - 建筑
    - 石油和天然氣
    - 農業

     

    特點/優勢Features/Benefits:
    - Original Snap-tite H Series multi-purpose coupling, widely used in varied applications
    - PH version connect under pressure option to connect lines with residual pressure caused by thermal expansion
    - Male port end options add versatility
    - 原創的 Snap-tite H 系列多功能快換接頭,廣泛地應用于各種各樣的應用當中
    - PH系列能在壓力下進行連接,適合用于因熱膨脹效應而引起背壓的管路應用
    - 外螺紋尾端連接增加了其多樣性

     

    應用Applications:
    - Industrial hydraulic lines
    - Water and coolant lines
    - High pressure fluid transfer
    - Mobile equipment
    - Cleaning equipment
    - General purpose fluid applications where residual pressure is present on the Nipple side of the connection
    - 工業液壓管路
    - 水及冷卻管路
    - 高壓流體輸送應用
    - 工程機械
    - 清洗機
    - 一般的管路應用,特別是陽接頭端在連接的時候產生背壓的情況

     

     

    Technical Specifications

    Body Size: 3/8, 1/2, 3/4 inch
    Maximum Operating Pressure: Up to 4500 psi, Up to 310 bar
    Maximum Operating Temperature: 121 °C, 250 °F
    Materials of Construction: Steel
    Brand: Parker
    Vacuum Pressure Rating: No
    Fitting Connection Type: Female Thread
    Interchange Type: Snap-tite PH
    Seal Material: Nitrile
    Media: Hydraulic
    Coupling Half: Coupler
    Minimum Operating Temperature: -40 °F
    Valve Type: Connect under pressure poppet
    Sleeve Type: Manual sleeve
    Lock Type: Locking balls
    Thread Size: Female
    Connection Type: NPTF, UNF
    Plating Type: Zinc with clear trivalent chromate
    Application: Hydraulic, General Purpose

     

     

    Connect Under Pressure, Multi-Purpose Quick Couplings (hyd, fluids) up to 4,500 psi - Snap-tite PH Series Couplers 型號

    Part Body Size (inch) Body Material Connection Thread Size (inch)
    VPHC12-12EF 3/4 Steel 1 1/16 - 12
    VPHC12-12F 3/4 Steel 3/4 - 14
    VPHC6-6F 3/8 Steel 3/8 - 18
    VPHC8-8F 1/2 Steel 1/2 - 14

     

     

     

       

    美國DMK Engineering Solutions公司
    信德邁科技(北京)有限公司 CNMEC Technology


    E-mail:sales@cnmec.biz fcg.cnmec@parkerdistribution.com.cn
    地址:北京市朝陽區望京街10號望京SOHO塔1C座2115室
    郵編:100102
    電話:010-8428 2935, 8428 9077, 8428 3983
    手機:139 101 22694
    Http://www.cnmec.biz
    傳真:010-8428 8762


    京ICP備08000876號-8
    京公網安備 11010502019740



    亚洲男人天堂,欧美视频在线电影,免费a级黄毛片,青草视频在线观看,青草视频在线观看