派克的2通海底球閥具有軟閥座和浮球設計，可用于高達10,000 PSI的工作深度和3050m的深度。根據API 17D PSL 3（包括API 6A PR2F）進行設計和測試，以在海底應用中提供安全可靠的性能。Parker's 2-way subsea ball valve featuring soft seat and floating ball design for operations up to 10,000 PSI and depths down to 3050m. Designed and tested to API 17D PSL 3 (including API 6A PR2F) for safe and reliable performance in subsea applications.
Small bore subsea hook-up applications have evolved. The future of hydrocarbon flow assurance is here, and the all new Parker small bore ball and needle valves are ready to transform your hook-up.
派克的軟座直角回轉球閥用于流量隔離，專門設計用于在海底應用中提供平穩，低扭矩的性能。利用與標準Parker的Hi-Pro系列球閥相同的設計技術，海底設計結合了必要的設計變更，可為海底行業提供可靠的外部加壓閥。Parker's soft seated quarter turn ball valve for flow isolation, designed specifically to deliver smooth, low-torque performance in subsea applications. Utilising the same design technology as the standard Parker's Hi-Pro series ball valve, the subsea design incorporates the necessary design alterations to provide a reliable externally pressurized valve for the subsea industry.
這種海底球閥設計采用PEEK自卸式閥座和PTFE填料，具有附加的O形圈密封，可防止海水進入閥門，這會對閥門的操作產生不利影響并污染工藝液體。Featuring PEEK self-relieving seat and PTFE packing, this subsea ball valve design incorporates additional o-ring seals, which prevent the ingress of sea water into the valve which would adversely affect the operation of the valve as well as contaminate the process liquid.
雙向閥提供多種耐腐蝕合金，適用于深度達3,050m的設備。閥門的設計便于手動操作或通過遙控車（ROV）進行操作。The bi-directional valves are available in a range of corrosion-resistant alloys and are suitable for equipment located at depths down to 3,050m. The valves are designed to facilitate operation either manually or by a Remotely Operated Vehicle (ROV).
派克的海底球閥的設計符合或超過API 17D PSL 3的嚴格資格測試要求。結構完整性和性能已被勞埃德檢查員在見證API 17D閥門設計驗證協議的情況下確認。這是在316SS模型的基礎上進行的，包括API 6A PR2F PSL3雙向測試協議以及API 17D高壓測試協議。Parker's subsea ball valves have been designed to meet or exceed the rigorous qualification test requirements of API 17D PSL 3. The structural integrity and performance have been confirmed by Lloyds inspectors witnessing the API 17D valve design validation protocol. This was carried out on the base 316SS model and included the API 6A PR2F PSL3 bi-directional testing protocol as well as the API 17D Hyperbaric test protocol.
- 上游石油和天然氣（液體介質）Upstream Oil & Gas (Liquid media)
- 兩件式浮球式側面入口結構Two-piece, floating ball style, side-entry construction
- 雙向液體流Bi-directional liquid flow
- PEEK閥座具有出色的耐化學性，耐熱性和耐磨性PEEK seats offer excellent resistance to chemicals, heat, and wear/abrasion
- 暢通的10mm流路Un-obstructed 10mm flow path
- 低摩擦，壓力輔助的PTFE軸密封延長循環壽命并降低操作扭矩Low friction, pressure assisted PTFE shaft seal increases cycle life and reduces operating torque
- 額外的密封設計，可防止水和淤泥滲入任何螺紋或旋轉的部件Additional seals engineered to prevent water and silt ingress to any threaded or rotating parts
- 設計用于接受多種類型的管和管端連接Designed to accept multiple types of tube and pipe end connections
- 可提供多種耐腐蝕材料Available in a variety of corrosion-resistant materials
- 經過設計和測試API 17D / API 6A標準Designed and tested to API 17D/API 6A standards
應用（液體介質）Applications (liquid media):
- 水下液壓歧管Subsea Hydraulic Manifolds
- 水下控制臍帶Subsea Control Umbilicals
- 水下井口和控制組件Subsea Wellheads and Control Packages
- 化學注入Chemical injection
- DBB，排放，通風口，測試線。DBB, bleed, vents, test lines.