• <tbody id="awnxc"><noscript id="awnxc"><i id="awnxc"></i></noscript></tbody>
  • <tbody id="awnxc"></tbody>


     

    Parker派克產品


    流體控制閥
    工程材料
      O型圈潤滑油
      測量及安裝工具
    13910122694
    產品資料下載
     
       

     

    Parker 針閥
    Parker Needle Valves
    Needle Valve, High Pressure - 150V Series 150,000 PSI

    Parker Autoclave的150V系列針型閥為非旋轉式立桿設計,通過5/16英寸的末端連接,工作壓力高達150,000 psi(10350 bar)。 這些閥是高強度15-5PH不銹鋼的圓柱體。 Parker Autoclave's 150V Series needle valves are a non-rotating rising stem design, with working pressures to 150,000 psi ( 10350 bar) with 5/16” ” end connections. These valves are a cylindrical body of high strength 15-5PH Stainless Steel.

     

     

    Parker Autoclave的150V系列針型閥是高強度15-5PH不銹鋼的圓柱體設計,并具有不旋轉的上升閥桿設計,該閥芯采用可更換的鎳馬氏體時效鋼閥座。這些專用閥可在高達150,000 psi(10350 bar)的壓力下運行。管道尺寸僅適用于5/16英寸。油管連接采用Parker高壓釜的錐和螺紋設計。Parker Autoclave's 150V Series needle valves are cylindrical body design of high strength 15-5PH stainless steel with a non-rotating rising stem design that utilizes a replaceable seat of nickel maraging steel. These specialty valves operate in pressures up to 150,000 psi (10350 bar). The tubing size is only available in 5/16”. Tubing connections utilize the Parker Autoclave cone and thread design.

    這些閥門具有許多功能,可在各種應用中提供可靠且無故障的服務。Along with their many features these valves provide dependable and trouble free service in wide variety of applications.

    派克 Autoclave 的高壓系列針型閥中小孔儀表閥的壓力能達到 150,000 PSI,在石油和天然氣加工工業上廣泛應用.

    派克 Autoclave 壓力系列針閥壓力可達 150,000 PSI,適用于石油和天然氣加工行業的小口徑儀表應用。

    市場Markets:

    - Oil and Gas
    - Research
    -石油和天然氣
    -研究

     

    特點/優勢Features/Benefits:

    - Tubing size 5/16”.
    - Non-rotating stem prevents stem/seat galling.
    - Rising stem/barstock body design.
    - Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
    - Cylindrical body of high strength 15-5PH stainless steel with stainless steel packing gland. Tool steel nonrotating stem with replaceable seat of nickel maraging steel. Stem must be actuated with torque wrench (refer to Tools, Installation, Operation and Maintenance section).
    - Wedge-type PTFE and leather packing below stem threads with beryllium-copper Autoclave Anti-Extrusion Back up Rings.
    - Vee stem tip only
    -油管尺寸為5/16”。
    -不可旋轉的閥桿可防止閥桿/閥座磨損。
    -閥桿/棒狀閥體的上升設計。
    -金屬對金屬閥座實現了氣密性關閉,在磨料流中具有更長的閥桿/閥座壽命,在反復的開/關循環中具有更高的耐用性,并具有出色的耐腐蝕性。
    -高強度15-5PH不銹鋼的圓柱體,帶有不銹鋼填料函。工具鋼非旋轉閥桿,帶可更換鎳馬氏體鋼閥座。閥桿必須用扭矩扳手驅動(請參閱“工具,安裝,操作和維護”部分)。
    -閥桿螺紋下方的楔形PTFE和皮革填充物,帶有鈹銅高壓釜防擠壓支撐環。
    -僅Vee閥桿尖

     

    應用Applications:

    - High Pressure Panels
    - High Pressure Fluid Handling Systems
    -高壓面板
    -高壓流體處理系統

     

     

    Technical Specifications

    Maximum Operating Pressure: 10,342 bar, 150,000 psi
    Tube Outside Diameter: 5/16 inch, 7.93 mm
    Stem Type: VEE
    Valve Type: 2-Way Angle/Replaceable Seat
    Connection Type: F312C150
    Bore Diameter: 0.062 inch, 1.57 mm

     

     

    Needle Valve, High Pressure - 150V Series 150,000 PSI 型號

    150V5072

     

     

     

       

    美國DMK Engineering Solutions公司
    信德邁科技(北京)有限公司 CNMEC Technology


    E-mail:sales@cnmec.biz fcg.cnmec@parkerdistribution.com.cn
    地址:北京市朝陽區望京街10號望京SOHO塔1C座2115室
    郵編:100102
    電話:010-8428 2935, 8428 9077, 8428 3983
    手機:139 101 22694
    Http://www.cnmec.biz
    傳真:010-8428 8762


    京ICP備08000876號-8
    京公網安備 11010502019740



    亚洲男人天堂,欧美视频在线电影,免费a级黄毛片,青草视频在线观看,青草视频在线观看