• <tbody id="awnxc"><noscript id="awnxc"><i id="awnxc"></i></noscript></tbody>
  • <tbody id="awnxc"></tbody>


     

    Parker派克產品


    流體控制閥
    工程材料
      O型圈潤滑油
      測量及安裝工具
    13910122694
    產品資料下載
     
       

     

    Parker 針閥
    Parker Needle Valves
    FCNV系列針閥 Needle Valve, FCNV Series - 22,500 PSI

    派克Autoclave的FCNV系列針型閥經過專門設計,可與22,500 psi(1,550 bar)的FCC錐形擴口連接。針閥可用于連接1/4“至1”外徑的Parker高壓釜管。Parker Autoclave's FCNV Series needle valve is specifically designed to interface with the FCC Flared Cone Connection to 22,500 psi (1,550 bar). The needle valves are available to connect with 1/4" to 1” O.D. Parker Autoclave tube sizes.

     

     

    派克Autoclave的FCNV系列針型閥經過專門設計,可使用擴口圓錐連接(FCC)技術與油管接口。這項獨特的正在申請專利的技術使用一個壓縮套筒和一個擴口的管端來創建雙密封連接,適用于高達22,500 PSI(1,550 bar)的各種中壓應用。Parker Autoclave's FCNV Series needle valves are specifically designed to interface to tubing using Flared Cone Connection (FCC) technology. This unique patent-pending technology uses a single compression sleeve and a flared tube end to create a dual seal connection that is suitable for a wide range of medium pressure applications up to 22,500 PSI (1,550 bar).

    這些閥可適用于1/4“,3/8”,9/16“,3/4”和1“ OD尺寸的管,并可選擇五種閥體樣式,包括2通直管和角管,以及三種方式配置。作為標準配置,所有閥門均由冷加工316不銹鋼制成,并提供2507超級雙工版本。316不銹鋼版本的額定壓力為20,000 PSI(1,379 bar),而2507 Super Duplex版本的額定壓力為22,500 PSI(1,550 bar)。The valves are available to suit 1/4", 3/8”, 9/16”, 3/4" and 1” O.D. tube sizes, with a choice of five body patterns including 2-way straight and angle, and three 3-way configurations. As standard, all the valves are manufactured from cold worked 316 stainless steel, with 2507 super duplex versions available as options. The 316 stainless steel versions have a pressure rating of 20,000 PSI (1,379 bar), while the 2507 Super Duplex versions are rated at 22,500 PSI (1,550 bar).

    作為標準,帶PTFE填料的FCNV系列針型閥的工作溫度范圍為-18至232?C(0至450?F)。提供各種包裝選項,可將下限擴展到-73?C(-100?F),將上限擴展到316?C(600?F)。As standard, FCNV series needle valves with PTFE packing have an operating temperature range of -18 to 232?C (0 to 450?F). Various packing options are available to extend the lower limit to -73?C (-100?F) and the upper limit to 316C (600F).

    所有這些針形閥均具有不旋轉的上升閥桿,以防止閥桿/閥座磨損,利用金屬對金屬閥座確保氣密性關閉,并設有連接泄油孔以確保安全和檢漏。All these needle valves feature a non-rotating rising stem to prevent stem/seat galling, utilise metal-to-metal seating to ensure bubble-tight shut-off, and incorporate connection weep holes for safety and leak detection.

     

     

    FCNV系列針閥 Needle Valve, FCNV Series - 22,500 PSI




    派克 Autoclave Engineers 中壓針閥接口為 FCC 法蘭連接可達 22,500 psi (1,550 bar).

    派克's FCNV針閥設計服務于擴口法蘭連接(FCC)技術.這種獨特的新技術利用一個接頭套筒和擴口管創建一個雙重密封連接,適用于各種中壓應用環境,壓力可達 22,500 PSI(1,550 bar)。

    閥門可連接1/4",3/8" 9/16" 3/4"and1" O.D.鋼管尺寸,有五種閥體形式,包括兩通直型及角型,還有三通形式。閥體材質均為 316 冷加工型不銹鋼為標準材質,也可選擇 2507 超級雙相鋼。316SS 不銹鋼材質壓力可達22,500 PSI(1,550 bar).

    FCNV 系列閥門采用PTFE(聚四氟乙烯)填料為標準選項,溫度范圍為-18 到 232°C(0 到 450°F).多種材質填料選項可使溫度低至-73°C(-100°F),高可達316°C(600°F).

    非旋轉法官可預防閥桿/閥座磨損,利用金屬對金屬閥座確保氣密性關閉,并將排水口連接更為安全,防止泄露。

    市場Markets:

    - Oil and Gas
    - Petrochemical
    - Chemical
    - Research
    -石油和天然氣
    -石化
    -化學
    -研究

     

    特點/優勢Features/Benefits:

    - FCC connection integral to valve body
    - Tubing sizes available from 1/4” to 1”.
    - Rising stem/barstock body design.
    - Non-rotating stem prevents stem/seat galling.
    - Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
    - PTFE encapsulated packing provides dependable stem and body sealing.
    - Stem sleeve and packing gland materials have been selected to achieve extended thread cycle life and reduced handle torque.
    - Choice of Vee or Regulating stem tip.
    - Available in five body patterns.
    -閥體上的FCC連接必不可少
    -管路尺寸從1/4“到1”。
    -閥桿/棒狀閥體的上升設計。
    -不可旋轉的閥桿可防止閥桿/閥座磨損。
    -金屬對金屬閥座實現了氣密性關閉,在磨料流中具有更長的閥桿/閥座壽命,在反復的開/關循環中具有更高的耐用性,并具有出色的耐腐蝕性。
    -PTFE密封填料提供可靠的閥桿和閥體密封。
    -選擇了莖套和填料壓蓋材料,以延長螺紋循環壽命并降低手柄扭矩。
    -選擇Vee或調節閥桿尖端。
    -提供五種機身樣式。

     

    應用Applications:

    - High Pressure Panels
    - Chemical Injection Skids
    - High Pressure Fluid Handling Systems
    -高壓面板
    -化學注入橇
    -高壓流體處理系統

     

    Technical Specifications

    Options: For extreme temperature and other options consult factory
    Connection Size: FLC250, FLC375, FLC562, FLC750, FLC1000
    Orifice Size: 0.109, 0.203, 0.312, 0.438, 0.562 inch, 2.76, 5.15, 7.92, 11.12, 14.27 mm
    Flow Rate: 0.31, 0.75, 1.30, 2.50, 4.40 Cv
    Pressure Rating: 20000 PSI (Stainless Steel as standard), 22500 PSI (Super Duplex option) psi, 1379 bar (Stainless Steel as standard), 1550 bar (Super Duplex option) bar
    Tube Outside Diameter: 1/4", 3/8", 9/16", 3/4", 1" inch
    Stem Type: Non Rotating Vee Stem (on/off service), Non Rotating regulating stem (tapered tip for regulating and shutoff), Vee Stem with replaceable seat, Regulating Stem with replaceable seat
    Body Type: 2 way straight, 2 way angle, 3 way, 2 on pressure, 3 way, 1 on pressure, 3 way, 2 stem manifold valve

     

    Needle Valve, FCNV Series - 22,500 PSI 型號

    Part Tube O.D. (inch) Stem Type Body Pattern
    FCNV12071 3/4" Non Rotating Vee Stem (on/off service) 2 way straight
    FCNV12072 3/4" Non Rotating Vee Stem (on/off service) 2 way angle
    FCNV12073 3/4" Non Rotating Vee Stem (on/off service) 3 way, 2 on pressure
    FCNV12074 3/4" Non Rotating Vee Stem (on/off service) 3 way, 1 on pressure
    FCNV12075 3/4" Non Rotating Vee Stem (on/off service) 3 way, 2 stem manifold valve
    FCNV12081 3/4" Non Rotating regulating stem (tapered tip for regulating and shutoff) 2 way straight
    FCNV12082 3/4" Non Rotating regulating stem (tapered tip for regulating and shutoff) 2 way angle
    FCNV12083 3/4" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 2 on pressure
    FCNV12084 3/4" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 1 on pressure
    FCNV12085 3/4" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 2 stem manifold valve
    FCNV12871 3/4" Vee Stem with replaceable seat 2 way straight
    FCNV12872 3/4" Vee Stem with replaceable seat 2 way angle
    FCNV12873 3/4" Vee Stem with replaceable seat 3 way, 2 on pressure
    FCNV12874 3/4" Vee Stem with replaceable seat 3 way, 1 on pressure
    FCNV12875 3/4" Vee Stem with replaceable seat 3 way, 2 stem manifold valve
    FCNV12881 3/4" Regulating Stem with replaceable seat 2 way straight
    FCNV12882 3/4" Regulating Stem with replaceable seat 2 way angle
    FCNV12883 3/4" Regulating Stem with replaceable seat 3 way, 2 on pressure
    FCNV12884 3/4" Regulating Stem with replaceable seat 3 way, 1 on pressure
    FCNV12885 3/4" Regulating Stem with replaceable seat 3 way, 2 stem manifold valve
    FCNV16071 1" Non Rotating Vee Stem (on/off service) 2 way straight
    FCNV16072 1" Non Rotating Vee Stem (on/off service) 2 way angle
    FCNV16073 1" Non Rotating Vee Stem (on/off service) 3 way, 2 on pressure
    FCNV16074 1" Non Rotating Vee Stem (on/off service) 3 way, 1 on pressure
    FCNV16075 1" Non Rotating Vee Stem (on/off service) 3 way, 2 stem manifold valve
    FCNV16081 1" Non Rotating regulating stem (tapered tip for regulating and shutoff) 2 way straight
    FCNV16082 1" Non Rotating regulating stem (tapered tip for regulating and shutoff) 2 way angle
    FCNV16083 1" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 2 on pressure
    FCNV16084 1" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 1 on pressure
    FCNV16085 1" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 2 stem manifold valve
    FCNV16871 1" Vee Stem with replaceable seat 2 way straight
    FCNV16872 1" Vee Stem with replaceable seat 2 way angle
    FCNV16873 1" Vee Stem with replaceable seat 3 way, 2 on pressure
    FCNV16874 1" Vee Stem with replaceable seat 3 way, 1 on pressure
    FCNV16875 1" Vee Stem with replaceable seat 3 way, 2 stem manifold valve
    FCNV16881 1" Regulating Stem with replaceable seat 2 way straight
    FCNV16882 1" Regulating Stem with replaceable seat 2 way angle
    FCNV16883 1" Regulating Stem with replaceable seat 3 way, 2 on pressure
    FCNV16884 1" Regulating Stem with replaceable seat 3 way, 1 on pressure
    FCNV16885 1" Regulating Stem with replaceable seat 3 way, 2 stem manifold valve
    FCNV4071 1/4" Non Rotating Vee Stem (on/off service) 2 way straight
    FCNV4072 1/4" Non Rotating Vee Stem (on/off service) 2 way angle
    FCNV4073 1/4" Non Rotating Vee Stem (on/off service) 3 way, 2 on pressure
    FCNV4074 1/4" Non Rotating Vee Stem (on/off service) 3 way, 1 on pressure
    FCNV4075 1/4" Non Rotating Vee Stem (on/off service) 3 way, 2 stem manifold valve
    FCNV4081 1/4" Non Rotating regulating stem (tapered tip for regulating and shutoff) 2 way straight
    FCNV4082 1/4" Non Rotating regulating stem (tapered tip for regulating and shutoff) 2 way angle
    FCNV4083 1/4" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 2 on pressure
    FCNV4084 1/4" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 1 on pressure
    FCNV4085 1/4" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 2 stem manifold valve
    FCNV4871 1/4" Vee Stem with replaceable seat 2 way straight
    FCNV4872 1/4" Vee Stem with replaceable seat 2 way angle
    FCNV4873 1/4" Vee Stem with replaceable seat 3 way, 2 on pressure
    FCNV4874 1/4" Vee Stem with replaceable seat 3 way, 1 on pressure
    FCNV4875 1/4" Vee Stem with replaceable seat 3 way, 2 stem manifold valve
    FCNV4881 1/4" Regulating Stem with replaceable seat 2 way straight
    FCNV4882 1/4" Regulating Stem with replaceable seat 2 way angle
    FCNV4883 1/4" Regulating Stem with replaceable seat 3 way, 2 on pressure
    FCNV4884 1/4" Regulating Stem with replaceable seat 3 way, 1 on pressure
    FCNV4885 1/4" Regulating Stem with replaceable seat 3 way, 2 stem manifold valve
    FCNV6071 3/8" Non Rotating Vee Stem (on/off service) 2 way straight
    FCNV6072 3/8" Non Rotating Vee Stem (on/off service) 2 way angle
    FCNV6073 3/8" Non Rotating Vee Stem (on/off service) 3 way, 2 on pressure
    FCNV6074 3/8" Non Rotating Vee Stem (on/off service) 3 way, 1 on pressure
    FCNV6075 3/8" Non Rotating Vee Stem (on/off service) 3 way, 2 stem manifold valve
    FCNV6081 3/8" Non Rotating regulating stem (tapered tip for regulating and shutoff) 2 way straight
    FCNV6082 3/8" Non Rotating regulating stem (tapered tip for regulating and shutoff) 2 way angle
    FCNV6083 3/8" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 2 on pressure
    FCNV6084 3/8" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 1 on pressure
    FCNV6085 3/8" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 2 stem manifold valve
    FCNV6871 3/8" Vee Stem with replaceable seat 2 way straight
    FCNV6872 3/8" Vee Stem with replaceable seat 2 way angle
    FCNV6873 3/8" Vee Stem with replaceable seat 3 way, 2 on pressure
    FCNV6874 3/8" Vee Stem with replaceable seat 3 way, 1 on pressure
    FCNV6875 3/8" Vee Stem with replaceable seat 3 way, 2 stem manifold valve
    FCNV6881 3/8" Regulating Stem with replaceable seat 2 way straight
    FCNV6882 3/8" Regulating Stem with replaceable seat 2 way angle
    FCNV6883 3/8" Regulating Stem with replaceable seat 3 way, 2 on pressure
    FCNV6884 3/8" Regulating Stem with replaceable seat 3 way, 1 on pressure
    FCNV6885 3/8" Regulating Stem with replaceable seat 3 way, 2 stem manifold valve
    FCNV9071 9/16" Non Rotating Vee Stem (on/off service) 2 way straight
    FCNV9072 9/16" Non Rotating Vee Stem (on/off service) 2 way angle
    FCNV9073 9/16" Non Rotating Vee Stem (on/off service) 3 way, 2 on pressure
    FCNV9074 9/16" Non Rotating Vee Stem (on/off service) 3 way, 1 on pressure
    FCNV9075 9/16" Non Rotating Vee Stem (on/off service) 3 way, 2 stem manifold valve
    FCNV9081 9/16" Non Rotating regulating stem (tapered tip for regulating and shutoff) 2 way straight
    FCNV9082 9/16" Non Rotating regulating stem (tapered tip for regulating and shutoff) 2 way angle
    FCNV9083 9/16" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 2 on pressure
    FCNV9084 9/16" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 1 on pressure
    FCNV9085 9/16" Non Rotating regulating stem (tapered tip for regulating and shutoff) 3 way, 2 stem manifold valve
    FCNV9871 9/16" Vee Stem with replaceable seat 2 way straight
    FCNV9872 9/16" Vee Stem with replaceable seat 2 way angle
    FCNV9873 9/16" Vee Stem with replaceable seat 3 way, 2 on pressure
    FCNV9874 9/16" Vee Stem with replaceable seat 3 way, 1 on pressure
    FCNV9875 9/16" Vee Stem with replaceable seat 3 way, 2 stem manifold valve
    FCNV9881 9/16" Regulating Stem with replaceable seat 2 way straight
    FCNV9882 9/16" Regulating Stem with replaceable seat 2 way angle
    FCNV9883 9/16" Regulating Stem with replaceable seat 3 way, 2 on pressure
    FCNV9884 9/16" Regulating Stem with replaceable seat 3 way, 1 on pressure
    FCNV9885 9/16" Regulating Stem with replaceable seat 3 way, 2 stem manifold valve

     

     

     

       

    美國DMK Engineering Solutions公司
    信德邁科技(北京)有限公司 CNMEC Technology


    E-mail:sales@cnmec.biz fcg.cnmec@parkerdistribution.com.cn
    地址:北京市朝陽區望京街10號望京SOHO塔1C座2115室
    郵編:100102
    電話:010-8428 2935, 8428 9077, 8428 3983
    手機:139 101 22694
    Http://www.cnmec.biz
    傳真:010-8428 8762


    京ICP備08000876號-8
    京公網安備 11010502019740



    亚洲男人天堂,欧美视频在线电影,免费a级黄毛片,青草视频在线观看,青草视频在线观看