• <tbody id="awnxc"><noscript id="awnxc"><i id="awnxc"></i></noscript></tbody>
  • <tbody id="awnxc"></tbody>


     

    Parker派克產品


    流體控制閥
    工程材料
      O型圈潤滑油
      測量及安裝工具
    13910122694
    產品資料下載
     
       

     

    Parker 流量控制器
    Parker Flow Controllers
    噴霧控制閥-100系列 Spray Control Valve - Code 100

    派克Conflow100系列噴霧控制閥是一種機械式噴霧控制閥,用于輸送帶的開采過程中的粉塵抑制.該控制閥可安裝在皮帶下面減少損壞.它也可以定位,以確保它不運行在卸載帶,從而更小化用水量. The Parker Conflow Code 100 spray control valve is a mechanically operated spray control valve used for dust suppression in mining where a conveyor belt is used.

     

     

    作為儀器儀表流體控制系統技術的行業先行者,派克漢尼汾旗下品牌Conflow設計和制造的100系列噴霧控制閥,以符合采礦和采石工業的嚴格要求。派克Conflow100系列噴霧控制閥可以控制多種流體的流量,通過機械地檢測皮帶在除塵應用中的運動,而不需要獨立的電源。 Parker Conflow's Code 100 spray control valve controls the flow of any fluid by mechanically sensing belt movement in dust suppression applications, without the need for an independent power supply.

    派克Conflow100系列噴霧控制閥的結構設計非常穩固,具有低維護的特點。派克Conflow100系列噴霧控制閥可以安裝在皮帶下面,以減少損壞的風險。它也可以定位,使它不運行在卸載帶,從而使用水量更少。 It is extremely robust and low maintenance. The Code 100 spray control valve can be fitted underneath the belt to minimise the risk of damage. It can also be positioned to ensure it does not operate on an unloaded belt, therefore minimising water usage.

    在1/2英寸以上和工作壓力上限為105bar的情況下,噴霧控制閥適用于在細粉塵堆積的底部皮帶上噴水。大的或小的輪直徑可選擇,4英寸或6英寸可用于不同的皮帶速度。 Available in 1/2” and above and maximum working pressure of 105 bar, the spray control valve is perfect for supplying water sprays on bottom belts where fine dust accumulates. Large or small wheel 4” or 6” are available for different belt speeds.

     

     

     

     

    噴霧控制閥-100系列Spray Control Valve - Code 100

     



    市場Markets:

    - Quarrying
    - Mining
    - 采石業
    - 采礦廠

    特點/優勢Features/Benefits:

    - Mechanically operated, no additional power supply is needed.
    - Operates at belt speeds from 0.5 m/sec (100 ft/min) to 3.75 m/sec (750 ft/min).
    - Reduces belt slip and over-wetting, valve only opens when belt moving and material on the belt.
    - Extremely robust and low Maintenance
    - Can be used in conjunction with other Parker Conflow units.
    - Works on high and low water pressures.
    - UK manufactured and tested.
    - Capable of spraying onto both top and bottom belts.
    - Code 100 is available in large volume or standard to meet project requirements.
    - 機械操作,不需要額外的電源。
    - 皮帶速度范圍從0.5米/秒(100英尺/分鐘)至3.75米/秒(750英尺/分鐘)。
    - 減少皮帶打滑和過濕,閥門只有在皮帶移動和皮帶上的材料時才打開。
    - 非常穩固和低維護
    - 可以與其他派克Conflow單元一起使用。
    - 在高水壓和低水壓下工作。
    - 英國制造和測試。
    - 能噴灑在頂部和底部的皮帶上。
    - 派克Conflow100系列可用于大容量或標準容量,以適應項目要求。

     

    應用Applications:

    - Supplying dust suppression water onto the belts transporting minerals, particularly at transfer points
    - Ideal in applications where there is no electrical or other source of power.
    - 在輸送礦物的皮帶上提供抑塵水,尤其是在輸送點上
    - 在沒有電力或其他電源的應用中是選擇。

     

     

    Technical Specifications

    Application: Supplying dust suppression water onto the belts transporting minerals, particularly at transfer points; supplying water sprays on bottom belts where fine dust accumulates
    Industry: Quarrying, Mining
    Maximum Operating Pressure: 105 bar
    Minimum Operating Speed: 110 ft/min
    Maximum Operating Speed: 750 ft/min
    Connection Size: 1/2" BSP, 1/2" NPT
    Wheel Diameter: 4, 6 inch
    Maximum Flow Rate: 100 L/min

     

     

    Spray Control Valve - Code 100 型號

    Part Wheel Diameter (inch) Maximum Flow Rate (lpm)
    CODE-100-A-NPT-V1 6 75
    CODE-100-A-NPT-V2 6 100
    CODE-100-A-NPT-V3 4 75
    CODE-100-A-NPT-V4 4 100

     

     

     

       

    美國DMK Engineering Solutions公司
    信德邁科技(北京)有限公司 CNMEC Technology


    E-mail:sales@cnmec.biz fcg.cnmec@parkerdistribution.com.cn
    地址:北京市朝陽區望京街10號望京SOHO塔1C座2115室
    郵編:100102
    電話:010-8428 2935, 8428 9077, 8428 3983
    手機:139 101 22694
    Http://www.cnmec.biz
    傳真:010-8428 8762


    京ICP備08000876號-8
    京公網安備 11010502019740



    亚洲男人天堂,欧美视频在线电影,免费a级黄毛片,青草视频在线观看,青草视频在线观看